Identification_Information: Citation: Citation_Information: Originator: USDA-FSA-APFO Publication_Date: 20130925 Title: ortho_1-1_1n_s_wi031_2013_1 Publication_Information: Publication_Place: Salt Lake City, Utah Publisher: USDA_FSA_APFO Aerial Photography Field Office Description: Abstract: This data set contains imagery from the National Agriculture Imagery Program (NAIP). The NAIP acquires digital ortho imagery during the agricultural growing seasons in the continental U.S.. A primary goal of the NAIP program is to enable availability of ortho imagery within one year of acquisition. The NAIP provides two main products: 1 meter ground sample distance (GSD) ortho imagery rectified to a horizontal accuracy within +/- 5 meters of reference digital ortho quarter quads (DOQQ's) from the National Digital Ortho Program (NDOP) or from the National Agriculture Imagery Program (NAIP); 1 meter or 1/2 meter GSD ortho imagery rectified within +/- 6 meters to true ground. The tiling format of NAIP imagery is based on a 3.75' x 3.75' quarter quadrangle with a 300 pixel buffer on all four sides. The NAIP imagery is formatted to the UTM coordinate system using the North American Datum of 1983 (NAD83). The NAIP imagery may contain as much as 10% cloud cover per tile. This file was generated by compressing NAIP imagery that cover the county extent. Two types of compression may be used for NAIP imagery: MrSID and JPEG 2000. The target value for the compression ratio is (15:1) for the 1 meter imagery and 60:1 for the 1/2 meter imagery. Purpose: The NAIP imagery is typically available for distribution within 60 days of the end of a flying season and is intended to provide current information of agricultural conditions in support of USDA farm programs. For USDA Farm Service Agency, the 1 meter and 1/2 meter GSD product provides an ortho image base for Common Land Unit boundaries and other data sets. The NAIP imagery is generally acquired in projects covering full states in cooperation with state government and other federal agencies who use the imagery for a variety of purposes including land use planning and natural resource assessment. The NAIP is also used for disaster response often providing the most current pre-event imagery. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2013 Currentness_Reference: Photography Source Image Dates. Status: Progress: Complete Maintenance_and_Update_Frequency: Irregular Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -92.323596 East_Bounding_Coordinate: -91.476804 North_Bounding_Coordinate: 46.823154 South_Bounding_Coordinate: 46.114334 Keywords: Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: farming Theme_Keyword: Digital Ortho rectified Image Theme_Keyword: Mosaic Theme_Keyword: Quarter Quadrangle Theme_Keyword: Ortho Rectification Theme_Keyword: Compression Theme_Keyword: MrSID Theme_Keyword: JPEG 2000 Theme_Keyword: NAIP Theme_Keyword: Compliance Theme_Keyword: Aerial Compliance Place: Place_Keyword_Thesaurus: Geographic Names Information System Place_Keyword: WI Place_Keyword: Douglas Place_Keyword: Douglas CO WI FSA Place_Keyword: 55031 Access_Constraints: There are no limitations for access. Use_Constraints: None, The USDA-FSA Aerial Photography Field Office asks to be credited in derived products. If defects are found in the NAIP imagery during the 1 year warranty period such as horizontal offsets, replacement imagery may be provided. Imagery containing defects that require the acquisition of new imagery, such as excessive cloud cover, specular reflectance, etc., will not be replaced within a NAIP project year. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USDA-FSA Aerial Photography Field Office Contact_Address: Address_Type: mailing and physical address Address: 2222 West 2300 South City: Salt Lake City State_or_Province: Utah Postal_Code: 84119-2020 Country: USA Contact_Voice_Telephone: 801-844-2922 Contact_Facsimile_Telephone: 801-956-3653 Contact_Electronic_Mail_Address: apfo.sales@slc.usda.gov Browse_Graphic: Browse_Graphic_File_Name: None Browse_Graphic_File_Description: None Browse_Graphic_File_Type: None Native_Data_Set_Environment: NAIP 3.75 Quarter Quadrangles mosaicked into a County format using data compression software. The target values for the compression ratio is (15:1) for the 1 meter imagery and 60:1 for the 1/2 meter imagery. Data_Quality_Information: Logical_Consistency_Report: NAIP 3.75 minute tile file names are based on the USGS quadrangle naming convention. Completeness_Report: None Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: FSA Digital Orthophoto Specs. Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: N/A 2d only Lineage: Source_Information: Source_Citation: Citation_Information: Originator: USDA-FSA Aerial Photography Field Office Publication_Date: 20130925 Title: Douglas, WI Source_Scale_Denominator: 12000 Type_of_Source_Media: External Media Types Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2013 Source_Currentness_Reference: Majority Aerial Photography Date Source_Citation_Abbreviation: Mr SID Compressed Image Source_Contribution: Mosaicked County Image Process_Step: Process_Description: Digital imagery was collected at a nominal GSD of 1.0m using seven Cessna 441 aircrafts flying at an average flight height of 9052m AGL. All aircraft flew with Leica Geosystem's ADS80/SH82 digital sensors with firmware 3.20 or newer. Each sensor collected 11 image bands. PanF27A,PanF02A and PanB14A panchromatic bands with a spectral range of 465-676nm. RedN00a and RedB16a with a spectral range of 604-664nm. GrnN00a and GrnB16a with a spectral range of 533-587nm. BluN00a and BluB16a with a spectral range of 420-492nm and Near-infrared bands NirN00a and NirB16a with a spectral range of 833-920nm. The CCD arrays have a pixel size of 6.5 microns in a 12000x1 format. Both the CCD's and the A/D convertors have a dynamic range of 12bits. The data is stored in 16bit format. The ADS is a push-broom sensor and the ground footprint of the imagery at NAIP scale is 12km wide by the length flightline. The maximum flightline length is limited to approximately 240km. The factory calibrations and IMU alignments for each sensor (Serial Numbers: 1321, 1413, 1420, 30012, 30017, 30022, 30034, and 30110) were tested and verified by in-situ test flights before the start of the project. The Leica ADS Flight Planning and Evaluation Software (FPES) is used to develop the flight acquisition plans. Flight acquisition sub blocks are designed first to define the GNSS base station logistics, and to break the project up into manageable acquisition units. The flight acquisition sub blocks are designed based on the specified acquisition season, native UTM zone of the DOQQs, flight line length limitations (to ensure sufficient performance of the IMU solution) as well as air traffic restrictions in the area. Once the sub blocks have been delineated they are brought into FPES for flight line design. The design parameters used in FPES will be 30% lateral overlap and 1.0m resolution. The flight lines have been designed with a north/south orientation. The design takes into account the latitude of the state, which affects line spacing due to convergence as well as the terrain. SRTM elevation data is used in the FPES design to ensure the 1m GSD is achieved over all types of terrain. The raw data was downloaded from the sensors after each flight using Leica XPro software. The imagery was then georeferenced using the 200Hz GPS/INS data creating an exterior orientation for each scan line (x/y/z/o/p/k). Technicians precisely measured tie points in 3 bands/looks (Back/Nadir/Forward) for each line using Leica Xpro software. The resulting point data and exterior orientation data were used to perform a full bundle adjustment with ORIMA software. Blunders were removed, and additional tie points measured in weak areas to ensure a robust solution. Once the point data was clean and point coverage was acceptable, photo-identifiable GPS-surveyed ground control points were introduced into the block adjustment. The bundle adjustment process produces revised exterior orientation data for the sensor with GPS/INS, datum, and sensor calibration errors modeled and removed. Using the revised exterior orientation from the bundle adjustment, orthorectified image strips were created with Xpro software and the April 2013 USGS 10m NED DEM. The Xpro orthorectification software applies an atmospheric-BRDF radiometric correction to the imagery. This correction compensates for atmospheric absorption, solar illumination angle and bi-directional reflectance. The orthorectified strips were then overlaid with each other and the ground control to check accuracy. Once the accuracy of the orthorectified image strips were validated the strips were then imported into Inpho's OrthoVista 4.6 package which was used for the final radiometric balance, mosaic, and DOQQ sheet creation. The final DOQQ sheets, with a 300m buffer and a ground pixel resolution of 1m were then combined and compressed to create the county wide CCMs. Process_Date: 20130925 Spatial_Data_Organization_Information: Indirect_Spatial_Reference: Douglas, WI Direct_Spatial_Reference_Method: Raster Raster_Object_Information: Raster_Object_Type: Pixel Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 15 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.9996 Longitude_of_Central_Meridian: -93 Latitude_of_Projection_Origin: 0.0 False_Easting: 500000 False_Northing: 0.0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: row and column Coordinate_Representation: Abscissa_Resolution: 1 Ordinate_Resolution: 1 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137 Denominator_of_Flattening_Ratio: 298.257 Entity_and_Attribute_Information: Overview_Description: Entity_and_Attribute_Overview: 8-bit pixels per band, 3 band RGB represent brightness values 0 - 255 Entity_and_Attribute_Detail_Citation: None Distribution_Information: Distributor: Contact_Information: Contact_Person_Primary: Contact_Person: Supervisor Customer Services Section Contact_Organization: USDA-FSA Aerial Photography Field Office Contact_Address: Address_Type: mailing and physical address Address: 2222 West 2300 South City: Salt Lake City State_or_Province: Utah Postal_Code: 84119-2020 Country: USA Contact_Voice_Telephone: 801-844-2922 Contact_Facsimile_Telephone: 801-956-3653 Contact_Electronic_Mail_Address: apfo.sales@slc.usda.gov Distribution_Liability: In no event shall the creators, custodians, or distributors of this information be liable for any damages arising out of its use ( or the inability to use it). Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: Compressed County Mosaic Format_Information_Content: Natural Color Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: None Offline_Option: Offline_Media: DVD-R Recording_Format: ISO 9660 Offline_Option: Offline_Media: USB Hard Disk Recording_Format: NTFS Offline_Option: Offline_Media: FireWire Hard Disk Recording_Format: NTFS Fees: Contact the Aerial Photography Field Office for more information Resource_Description: Mosaicked County Image for Douglas, WI Metadata_Reference_Information: Metadata_Date: 20130925 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USDA-FSA Aerial Photography Field Office Contact_Address: Address_Type: mailing and physical address Address: 2222 West 2300 South City: Salt Lake City State_or_Province: Utah Postal_Code: 84119-2020 Country: USA Contact_Voice_Telephone: 801-844-2900 Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998